Specifying Cloud Service Settings - Canon Cloud Portal User Manual

Specifying Cloud Service Settings
This section describes the information settings performed by the administrator from the Remote UI
for cloud services used on the machine.
Before specifying the settings, an account must be acquired for the cloud service to use.
2
•
Management applications cannot be accessed in the following cases:
- A user other than an administrator attempted access.
- The management application is already being accessed on another computer.
- A cloud service is being used from the touch panel display of the machine.
•
Make sure you log out before closing a management application. If you close the Web browser without
logging out, management applications cannot be used for a while, even if you log in again.
1
Start your Web browser .
2
Enter the appropriate URL into [Address] or [Location] .
3
Enter the required information and log in to the Remote UI as an
2-2

Specifying Cloud Service Settings

http://<IP address of the machine or host name>/
If the Remote UI does not start properly and an error message appears, delete the cache files of your
Web browser.
administrator .
•
For instructions on logging in with Default Authentication set, see e-Manual > MEAP > Default
Authentication (Department ID Management).
•
For instructions on logging in with SSO-H set, see e-Manual > MEAP > SSO-H (Single Sign-On H).