Warning Messages Displayed In Management Applications - Canon Cloud Portal User Manual

Warning Messages Displayed in Management Applications

Cannot access because the system is logged in by another user. Wait a while, and then try to access again.
Cause 1
Remedy
Cause 2
Remedy 1
Remedy 2
Cause 3
4
Remedy
4-22
List of Error and Warning Messages
The machine is being operated from the touch panel display.
Conclude operations being performed from the touch panel display.
The management application was being operated by another administrator.
Wait until the other administrator logs out from the management application.
Wait for the timeout of other session information.
The Auto Clear mode was activated when this application was displayed on the touch panel
display and with the following settings specified on the machine:
•
Default Authentication is set as the login service.
•
The System Manager Settings are set and Department ID Management is set to 'Off' .
•
[Default Screen at Startup] in [Preferences] (Settings/Registration) is set to a setting other than
[Main Menu].
The Auto Clear mode was activated or the Energy Saver key was pressed when this application
was displayed on the touch panel display. Or, you logged out of the machine with this
application displayed using [Log Out] or
System Manager.
Press (Main Menu) on the control panel of the machine.
(Log In/Out), after logging in to the machine as the