Save Data Command; Save Specified Type - Brother HL Series Technical Reference Manual

Hide thumbs Also See for HL Series:

Table of Contents

Save Data Command

ESC CR ! 12345F type(4byte) size(4byte) data...

** type = MCRO, DATA

Available Devices

This command saves data of the specified type with the data ID which is set with the ESC & f # Y

(Macro ID Configuration) command.

If there is insufficient memory in the printer to store the data, a memory full error occurs.

When the printer supports two or more storage devices, the command saves the data onto the device

specified by the select storage device command. When only one device is enabled, the command saves

onto that device.

HL-1660e/2060/2400C:

34 MEMORY FULL

43 CARD1 W ERROR

43 CARD2 W ERROR

HL-2400Ce/3400CN

43 DEVICE1 W ERROR

43 DEVICE2 W ERROR

43 DEVICE3 W ERROR

HL-2460/3260N/2600CN/3450CN/7050:

43 CARD ERROR

43 HDD ERROR

HL-1650/1670N/1850/1870N/5070N/5170DN/5270DN/5280DW/5380DN:

43 SERVICE E74

HL-6050/6050D/6050DN/8050N/2700CN:

43 CARD ERROR

APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 7

Show Quick Links

Table of Contents