Operation: Preparing For Flight; Syncing Your Helicopter - Brookstone Stunt Copter User Manual

oPeRaTIon: PRePaRInG foR flIGhT

• Verify that there are 6 "AA" batteries inside the remote control unit and the
helicopter's battery has been installed correctly .
• Make sure to be in a large space with an open radius of at least 50 feet .
• Make sure the empty space has no obstacles or nearby water . Set your
helicopter on a clean flat surface before take-off .
WARNING! DO NOT ATTEMPT TO FLY YOUR HELICOPTER OUTDOORS IF
THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR LIGHTNING . IT COULD
DAMAGE YOUR HELICOPTER AND POSSIBLY EVEN CAUSE BODILY HARM .

sYncInG YoUR helIcoPTeR

Your helicopter utilizes an automatic 2 . 4 G channel selection system that allows
up to 8 people to fly side by side in the same wireless range .
for One Person Play:
1 . Before starting, make sure that the power on the remote is in the OFF position .
Also make sure that there are no other 2 . 4 G devices in the area .
2 . Install the interchangeable battery into the helicopter and set it down on a flat
surface . The red LED indicators inside the helicopter body should flash .
3 . Put the remote throttle to the "zero" position (all the way down), then turn ON
your remote . The remote will "Beep" in 3-5 seconds . When you hear a long
"Beep, " the red LED indicators inside the body should stay solid red .
This indicates that your product has been successfully synced .
12