Brookstone Stunt Copter User Manual page 17

• If your helicopter is not steadily hovering and is banking to the left or right
automatically, you may need to adjust the BANKS TRIM buttons .
• If your helicopter banks to the left, push and release the BANKS TRIM button
repeatedly to the right until the banking stops and proper flight is maintained .
• If your helicopter banks to the right, push and release the BANKS TRIM button
to the left in the same manner until the problem is resolved .
• From time to time you may have to adjust the BANKS TRIM to left/right
to ensure the helicopter will steadily hover in mid-air and respond accurately
to your commands .
Banks Trim
Forward/backward
Trim Controls
throttle Speed trim
• If you find the throttle is too sensitive when you fly the helicopter, you may need
to utilize the THROTTLE SPEED TRIM .
• Push and release the THROTTLE SPEED TRIM button back to lower the sensitivity
of the throttle . Push and release the THROTTLE SPEED TRIM button forward to
increase the sensitivity of the throttle . The middle position is recommended .
Push to go right Push to go left
16