Brother MFC-8510DN Basic User's Manual page 119

Printing received faxes (continued)
Difficulties
Received faxes appear as split or
blank pages.
Telephone line or connections
Difficulties
Dialing does not work. (No dial
tone)
The machine does not answer
when called.
Suggestions
Left and right margins are cut off or a single page is printed on two pages.
See Paper Size uu page 16.
Turn on Auto Reduction.
See Advanced User's Guide: Printing a reduced incoming fax.
Suggestions
Check all line cord connections. Make sure the telephone line cord is plugged into
the telephone wall jack and the LINE jack of the machine.
(Canada only) Change Tone/Pulse setting.
See Quick Setup Guide.
Send a manual fax by pressing Hook and dialing the number. Wait to hear fax
receiving tones before pressing Start.
If there is no dial tone, connect a known working telephone and telephone line
cord to the jack. Then lift the external telephone's handset and listen for a dial
tone. If there is still no dial tone, ask your telephone company to check the line
and/or wall jack.
Make sure the machine is in the correct receive mode for your setup.
See Receive Mode settings uu page 33.
Check for a dial tone. If possible, call your machine to hear it answer. If there is
still no answer, check the telephone line cord connection. If you do not hear ringing
when you call your machine, ask your telephone company to check the line.
Troubleshooting
B
107