Tmc For Dynamic Navigation Systems; Cd Mode; Switching To Cd Mode - Blaupunkt Woodstock DAB 53 Operating Instructions Manual

TMC
TMC for dynamic navigation
systems
TMC stands for "Traffic Message Chan-
nel." Traffic information announcements
are broadcast digitally using TMC, which
means they can be used by compatible
navigation systems during route plan-
ning. Your car radio has a TMC output
which you can use for connecting Blau-
punkt navigation systems. You can find
out from your Blaupunkt dealer which
navigation systems can be used with
your car radio.
If a navigation system is connected and
a TMC station is being received, TMC
lights up in the display.
If dynamic navigation is active, a TMC
station will be tuned into automatically.
Note:
If the TMC function of a connected
navigation device is activated, the
"DAB-FM switching function" will
be deactivated.

CD mode

You can use this unit to play standard
CDs with a diameter of 12 cm.
Risk of severe damage to the
CD drive!
CD singles with a diameter of 8 cm
and contoured CDs (shape CDs) are
not suitable for playback in this unit.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.

Switching to CD mode

If there is no CD inserted in the
drive,
button 9.
press the
The flip-release panel opens.
Gently insert the CD with the print-
ed side uppermost into the drive
until you feel some resistance.
The CD is drawn into the drive automat-
ically.
You must not hinder or assist the drive
as it draws in the CD.
Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
CD playback begins.
If a CD is already inserted in the
drive.
Keep pressing the SRC button @
until "CD" appears in the display.
Playback begins from the point at which
it was last interrupted.
CD MODE
67