Radio - Blaupunkt 520 Handbook

Treble
Press the audio selector (Volume knob)
twice, to select the Treble mode. This will be
confirmed on the display by 'TREBLE' with
the current setting. While in this mode, turn
the selector knob clockwise or anti-
clockwise to adjust the treble to the desired
level. After 2 seconds the display will return
to the former mode.

Radio

Selecting Waveband
AM Band:
Press AM/FM button 9 to select AM band.
FM Band:
Press AM/FM button 9 to select FM band
or to switch between FM1, FM2 and AM.
AM 1017
Station on AM Band
FM 105.9
Station on FM Band
Stereo Broadcast:
When a stereo broadcast is received on FM,
the stereo indicator ' ' appears in the
display. In case of poor field-strength the
radio automatically switches to mono but
the ' ' indicator may still be shown on the
display.
Tuning-in a station
You can tune-in stations in different ways:
• Automatic seek
• Manual seek
• Auto-store (AS)
Automatic Seek Tuning
This function seeks radio stations
automatically. Press button SEEK>> <
to automatically select the next higher
frequency radio station. Press button
<<SEEK < to automatically select the next
lower frequency radio station. During this
operation, the radio is muted. As the radio
can seek weak and noisy distant radio
stations, it is recommended to switch the
radio to 'local' mode.
To do this, press LOC button 7. The
current mode ('LOCAL ON' or 'LOCAL OFF')
is displayed. Press the LOC button 7 again
to switch between 'LOCAL ON' or
'LOCAL OFF' mode.
LOCAL ON
• In LOCAL ON mode, the radio will first
search for strong stations. If no strong
station can be found it will search for
any receivable station.
• In LOCAL OFF mode the radio will
search for any receivable station (useful
in areas where there are no strong
stations).
The LOCAL ON/OFF setting does not affect
the AS function (refer to section 'Automatic
Storing' elsewhere in this handbook).
5