Tuning Into A Station; Storing Stations Or Calling Stored Stations; Scanning Stations; Storing Stations Automatically (Travelstore) - Blaupunkt Cupertino 220 Operating And Installation Manual

Radio mode
in the "TUNER" menu", menu item "BAND"
(band selection)). Deactivated memory
banks are skipped during the source selec-
tion with the SRC button

Tuning into a station

There are various ways of tuning into a station:
Tuning into stations manually
u Briefl y press the
several times to incrementally change the
frequency.
Starting station seek tuning
u Press the
/ button
onds to start station seek tuning.
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only traffi c information stations
are tuned into if the priority for traffi c infor-
mation ( ) is switched on.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SENS").
• If PTY is switched off , you can also start
station seek tuning by pressing the
7
button .
Storing stations or calling stored
stations
u Select the desired memory bank.
u If necessary, set the desired station.
u Press the station button 1 - 5
2 seconds to store the current station under
the button.
- or -
u Briefl y press the station button 1 - 5
up the stored station.
8
=
7
/ button once or
7
for approx. 2 sec-
/
;
for approx.
;
to call

Scanning stations

With the scan function, you can scan either every
receivable station or the stored stations of the cur-
rent waveband.
Note:
You can adjust the scan time for each sta-
tion (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN").
Scanning receivable stations
u Press the MENU button
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
u Briefl y press the MENU button
tinue listening to the station that is currently
being received.
Scanning stored stations
u Press the
/ button
onds to start scanning.
During the scan, the display shows the mem-
ory location and the current frequency or sta-
tion name.
u Briefl y press the
listening to the station that is currently being
scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations off ering the strongest
reception in the region in one memory bank, Any
previously stored stations in this memory bank are
deleted in the process.
With Travelstore, you can store 5 FM stations in
the FMT memory bank in all reception areas.
In the reception areas "USA", "S-AMERICA" and
" THAILAND", you can also store 5 AM stations in
the AMT memory bank.
u Select a memory bank of the desired wave-
band, e. g. FM1 or AM.
2
for approx. 2 sec-
2
to con-
7
for approx. 2 sec-
7
/ button to continue