Operations - Bissell LITTLE GREEN PROHEAT 50Y6 SERIES User Manual

Operations

Getting ready
1. To fill the clean water/solution tank.
a. Remove the tank by lifting it straight up
and then away from the unit.
b. Unscrew the black cap at the bottom of
the clean/solution tank.
c. Using a standard liquid measuring cup
(or cap on bissell 2X Portable cleaning
formula), measure 4oz. of formula (2 caps
full) and pour into tank. Then fill with hot
tap water to the WATeR fill line. Replace
and tighten the black cap. Do not boIl
oR mIcRoWaVE WatER.
d. Replace the clean/solution tank by
lining up the vertical guides on the left
side of the unit with the indentations on
the clean/solution tank and gently sliding
it down into position.
2. Unwrap vacuum flex hose completely from
onboard hose storage.
3. Attach your selected cleaning tool to the
spray trigger unit by pressing tool onto spray
trigger firmly until the button lock snaps into
hole. Make certain the tool is securely attached.
4. Twist the quick release cord wrap clockwise to
unwrap the power cord.
5. Plug into proper outet.
pre-treating
Cleaning effectiveness will be enhanced if you
pre-treat heavily stained or highly-soiled areas.
Here's how to do it:
1. Hold the cleaning tool just above the surface
of the carpet or upholstery to be cleaned. Press
the trigger to release a spray of cleaning solution
directly onto the soiled area.
2. Wait 3-5 minutes before cleaning.
www.bissell.com
6
1a.
1d.
800.237.7691
1b. 1c.
3.
4.