Page 1
USER'S GUIDE 4625, 5206, 5283 SERIES Thank You Safety Instructions Product View Assembly Operations Maintenance and Care 10-15 Troubleshooting Replacement Parts Accessories Warranty Product Registration Consumer Care...
Page 2
Your BISSELL vacuum cleaner is well made, and we back it with a two-year limited warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll...
(ASTA approved to BS 1362) fuse is fitted their safety. in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a mains socket.
*Febreze® and related trademarks are owned by WARNING: The Procter & Gamble Company, Cincinnati, Ohio and used under license by BISSELL, Inc. Do not plug in your vacuum **Select models may include Pet Hair Fabric Tool or cleaner until you are familiar...
ssembly WARNING: The only tool you’ll need to assemble your Plastic film can be dangerous. vacuum cleaner is a Phillips screwdriver. To avoid danger or suffocation, keep away from babies Attach handle to vacuum and children. Some models may have a non- Febreze®...
ssembly Attach the vacuum hose & tools continued 3. Place the TurboBrush® Tool or Pet TurboEraser™ Tool (select models only) into its holder from the front of the vacuum. Power cord CAUTION: To store the power cord, wrap cord Before using your vacuum, make around the upper and lower cord wrap sure that the dirt container is in on the side of the vacuum.
ssembly Handle Positions Using your foot, press the handle release pedal, located on the lower left side of the vacuum to recline to a cleaning position. 1. Upright – For storage and above floor cleaning with tools. 2. Normal Cleaning – Press handle release pedal once.
perations Clean filter indicator The clean filter indicator tells you when the air flow in your vacuum is reduced due to dirty filters or a clog in the hose. The clean filter indicator will remain green until the airflow is reduced. At that time, it begins to change to red.
perations Pet Hair Fabric Tool (select models): Use this tool on fabrics such as drapes, beds or anywhere else pet hair may collect. Long Reach Dusting Tool (select models): Use this tool for dusting large surfaces. TurboBrush® Tool (select models): Use rotating brush action for small flat areas such as stair and cushions.
aintenance and Care To maximize your cleaning performance and extend the life of your vacuum, it is very important that you empty WARNING: your dirt container and check and clean your filters frequently. Follow To reduce the risk of electric the instructions on the following shock, turn power switch OFF pages, and perform these simple...
Page 11
aintenance and Care Cleaning the dirt container continued 5. If desired, the lower dirt cup may be washed in warm water. Make sure it is completely dry before reassembling. NOTE: Do not put in the dishwasher. NOTE: Use of moist parts/compo- nents in your unit will damage the motor and void your warranty 6.
aintenance and Care Clearing Clogs 1. Turn the power switch off and unplug the vacuum from the electrical outlet. 2. Check the upper tank for build up or clogs. 3. If you notice dirt build up in the inner cyclone, follow instruction on how to clean the inner cyclone in page 10.
Page 13
aintenance and Care Maintaining the Pet TurboEraser™ Tool and TurboBrush® Tool (select models only) Select models come with either the Pet ® TurboEraser™ Tool or TurboBrush Tool. Both tools should be checked regularly for clogs and debris wrapping around either the paddles or bristles.
aintenance and Care Check rotating floor brush and drive belt CAUTION: You should check your vacuum cleaner's rotating floor brush and drive belt regularly for wear or To reduce the risk of injury damage. You should also clean the from moving parts, turn brush and the brush ends of strings, off vacuum and disconnect hair and carpet fibers.
NOTE: It is important that you use only genuine BISSELL replacement belts. Generic belts many not meet the exact specifications required to keep your vacuum operating at its peak performance.
Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact Customer Care listed on page 20. w w w . b i s s e l l . c o m...
eplacement parts Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item Part No. Part Name 203-1730 Drive Belt 203-1739 Twist ‘n Snap Hose 203-1751...
Page 18
ccessories Item Part No. Part Name 203-1740 Crevice Tool 203-7529 Pet TurboEraser™ Tool 203-1741 Pet Hair Fabric Tool 203-1228 Dusting Brush/Upholstery Tool 203-1769 Long Reach Dusting Tool 203-2447 TurboBrush® Tool *Not all parts are included with every model. w w w . b i s s e l l . c o m...
If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by telephone, or regular post as described below, or contact your local in country distributor.
Page 20
ISSELL consumer care If your BISSELL product should require service: Call BISSELL Consumer Care at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair.