Table of Contents
Advertisement
Assembly
Your deep cleaner assembles quickly and easily.
The only tool you will need for assembly is a
Phillips head screwdriver.
1. Slide upper body into lower body.
2. Secure with screws.
NOTE: The screws can be found taped to the
handle.
3. Slide handle assembly down into upper body
until it will go no further. Align screw slots.
4. Secure with screw.
5. Place clean water/solution tank on back
of unit.
Operations
Before you clean
1. Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
2. Vacuum carpet thoroughly.
3. Decide where to begin. Plan to leave a path
open to empty soiled water and refill cleaner.
Note: Carpeting will dry in three to four hours,
depending on carpet style and air circulation in
room. A floor fan speeds drying.
WARNING
Do not plug in your deep cleaner until you have completely
assembled it per the instructions and are familiar with all
instructions and operating procedures.
1.
3.
5.
www.BISSELL.com
2.
4.
5
Advertisement
Table of Contents
