Table of Contents
Advertisement
>>>
GENERAL OPERATION
Entering characters
Characters are entered by pressing the
> D
keys in the central area.
> GB
> F
> I
> E
> P
Once the entry is complete, the process is
concluded by pressing the
> NL
the entry passed on to the Traffic Assist
> DK
for processing.
When a navigation destination is entered,
> S
the Traffic Assist compares the entry with
the set of data.
> N
The Traffic Assist then only makes those
> FIN
letters which are possible available for se-
lection.
> TR
The non-selectable characters are shown
in a lighter font.
> GR
> PL
> CZ
> H
> SK
24
Scrolling through the lists
If you have already entered some of the
letters of the selection you want, you can
use the selection list to display all the des-
tinations containing the combination of
letters in question.
key and
> To call up the selection list, press the
key.
Note:
The quantity of selection options is dis-
played in the form of the number on the
button. When there are more than 300
options, the precise number is not dis-
played.
In the list, all the entries corresponding to
the letters already entered are displayed.
The letters entered are coloured red in
the case of the individual entries.
The selection list appears.
> Press the
arrow keys on the
right hand side of the screen to scroll
through the list.
> Press the destination you want.
The destination is adopted and the selec-
tion list is closed.
Special characters and umlauts
Special characters and umlauts do not
have to used when entering the names of
towns and streets. The Traffic Assist will
change entries from AE, OE and UE if
necessary.
> If, for example, you are looking for the
location "Würzburg", then simply press
"WUERZBURG" or "WURZBURG".
Special characters can be useful when
naming destinations and routes.
Advertisement
Table of Contents
