Fitting The Firefront; Fitting The Cable Clamp; Do I Need Any Tools; Where And How Can You Fit The Firefront - Baxi VALOR FIRES 845 Installer And Owner Manual

Important: Before continuing with the installation of this firefront please ensure
that you have completed the information on the last page of this guide. This
includes boiler information.
It is important to install the boiler before installing the firefront.
Please read this section thoroughly before positioning the firefront.

Fitting the cable clamp.

If the mains cable is to be routed to the left hand
side of the firefront there is a cable clamp
supplied with the firefront to hold the cable in
place. This prevents the cable being trapped
under the firefront during installation. Fit the cable
clamp as in figure 3.

Do I need any tools?

You will need a Pozidrive / Phillips / cross head
screwdriver. This should have a number 2 size tip.

Where and how can you fit the firefront?

Q What opening size do you need in the surround or fireplace opening?
A This firefront can be fitted into fireplaces or surrounds where the following
dimensions are available.
Width
Height
Depth
Q Can the firefront be installed into a 'hole in the wall' (elevated opening)?
A We do not recommend the firefront for this type of installation.
Q Do you want to fit the firefront into a surround or fireplace opening without
the optional spacer frame?
A The minimum rebate / depth required is
Q Do you want to fit the firefront into a surround using the optional spacer
frame?
A The minimum rebate required is 45mm.
©

Baxi Heating U.K. Limited 2009.

INSTALLER GUIDE

5. FITTING THE FIREFRONT

390mm - 490 mm
560mm - 595 mm
At least 95mm
Figure 3. Fitting the cable clamp
95mm.
Page 9