Fitting The Fascia - Baxi VALOR FIRES 845 Installer And Owner Manual

Fitting the Lyrica fascia.
1. Remove the fascia from its packaging.
2. There are two magnets on the fascia
(See figure 8). Ensure that they are located
correctly before fitting the fascia.
3. Hold the fascia firmly and lift into place.
Keeping the magnets away from the body
of the heater, locate the fascia hanging
brackets into those on top of the heater
(See figure 8). Lower the fascia into place
and swing the bottom of the fascia towards
the heater to engage the magnets.
4. Place the lower casting at the base of
the firefront.
Fitting the Nano fascia.
1. Remove the fascia from its packaging.
2. There are three magnets on the fascia
(See figure 9). Ensure that they are located
correctly before fitting the fascia.
3. Hold the fascia firmly and lift into place.
Keeping the magnets away from the body
of the heater, locate the fascia hanging
brackets into those on top of the heater
(See figure 9). Lower the fascia into place
and swing the bottom of the fascia towards
the heater to engage the magnets.
©
Baxi Heating U.K. Limited 2009.
INSTALLER GUIDE

6. FITTING THE FASCIA

Figure 8.
Figure 9.
Page 14