Operating The Boiler; Understanding The Boiler Control Functions; To Light And Reset The Boiler; How To Switch The Boiler On - Baxi VALOR FIRES 845 Installer And Owner Manual

OWNER GUIDE

2. OPERATING THE BOILER

The Boiler Control is located on the right hand side of the firefront (See figure 1).
Figure 1. Boiler Control (Shown with door open)
Note: To operate the Boiler Control the On / Off button needs to be pressed for a
minimum of half a second.

Understanding the Boiler Control functions.

Is the Boiler ON or OFF?
If the boiler is OFF the display on the Boiler Control will read OFF.
This means the boiler will not operate even if the system external
controls (timer, programmer etc.) are requesting central heating or
domestic hot water.
If the boiler is ON then the display on the Boiler Control will show a
number, this being the 'primary flow' temperature which is the
temperature of the water in the central heating system.
In this condition the boiler is not operating, but will respond to a request from system
external controls.

How to switch the Boiler ON.

If the boiler is OFF, open the hinged panel that covers the Boiler Control. Press the
On / Off button on the Boiler Control for half a second.
©
Baxi Heating U.K. Limited 2009.
Page 19