Download Print this page

HP ProLiant BL460c Specification page 32

Server blade
Hide thumbs Also See for ProLiant BL460c:

Advertisement

QuickSpecs
Technical Specifications
HP Smart Array E200i
Controller
Embedded NC373i
Multifunction Gigabit
Server Adapter
Disk Drive and
Enclosure Interface
Cache Memory Speed DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth.
Server Interface
SAS Speed
Cache Memory
Logical Drives
Supported
Maximum Logical Drive
Capacity
Host Memory
Addressing
RAID Support
Upgradeable Firmware Upgradeable Firmware
Network Processor
Data Transfer Method Four lane (x4) PCI Express
Network Transfer Rate 1000 Mb/s half duplex (theoretical maximum value)
IEEE Compliance
Standard Features
DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
x4 2.5G PCIe provides 2GB/s maximum bandwidth.
x2 3G SAS provides 600MB/s maximum bandwidth.
40-bit 64MB or 128MB cache: ECC protection, battery-backed, and
transportable
Up to 32 logical volumes
144GB (2 x 72GB)
64-bit, supporting greater than 4GB server memory space
RAID 5 (Distributed Data Guarding) requires 128MB BBWC option
RAID1, 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Broadcom 5708S
NOTE: The Gigabit Ethernet adapters above transmit from the server
only at 2000 Mbps, full duplex per port. For more information, see the
"Network Controller" segment in the Standards Features section.
802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x
TCP/IP offload engine (TOE) for Microsoft Windows
iSCSI Boot for Linux
9K jumbo frames
TCP/IP checksum offload (TCO)
Large send offload (LSO)
Interrupt coalescence
Dual address cycles (DAC)
Wake-on-LAN (WOL)
Pre-boot execution environment (PXE)
ProLiant Teaming including Network Fault Tolerance, Transmit
Load Balancing, and Switch-Assisted Load Balancing
IPv6 packet transmit and receive (excluding all offload
capabilities); IPv6 aware SNMPv1 agents for Windows
HP ProLiant BL460c Server Blade
Page 32

Advertisement

loading