HP ProLiant BL460c Specification page 3

QuickSpecs
Overview
HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC512m Dual Port 10GbE Multifunction BL-c Adapter
4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on
Mellanox technology
Internal USB Support:
One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models
NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and
attaching directly to SAN. Please note that this model does not replace any prior model offerings. The
feature listed above is not included in the standard Drive-less configure to order model. However, all
configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart
Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See
Factory Integrated Model section for more information.
VMware ESX Server 3i and Citrix XenServer virtualization technology
Integrated Hypervisors:
VMware ESX Server 3i virtualization technology
Citrix XenServer virtualization technology
Form Factor:
HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures
Management:
Integrated Lights-Out 2 (iLO 2) Standard Blade Edition with virtual KVM and graphical remote console at no
additional cost.
Operating Systems:
Supports Windows, Linux, Netware, and Solaris Operating Systems
Enclosures:
HP offers three different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 16 ProLiant BL460c servers
plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 8 HP ProLiant BL460c servers
plugged horizontally.
The HP BladeSystem c3000 tower enclosure is designed with casters for sites without racks and holds up
to 8 HP ProLiant BL460c servers plugged vertically.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard
Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date
of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional
support may be covered under the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service agreements. Certain restrictions
and exclusions apply. SATA hard drives have a one year warranty.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Additional information
regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008
HP ProLiant BL460c Server Blade
Page 3