HP ProLiant BL460c Specification page 2

QuickSpecs
Overview
HP ProLiant BL460c server blade includes:
Processor:
Up to two Quad-Core Intel® Xeon® 5400 sequence processors
Up to two Quad-Core Intel® Xeon® 5300 sequence processors
Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors
Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00
GHz 1333MHz-2x6 MB Level 2 cache memory
Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory:
Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz
NOTE: 64GB of Memory is supported with 80W processors and below. Not supported with 120W
processors
Supporting low-power memory
Advanced ECC memory support
Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller:
Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache
with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO
models
NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and
attaching directly to SAN. Please note that this model does not replace any prior model offerings. The
feature listed above is not included in the standard Drive-less configure to order model. However, all
configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart
Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See
Factory Integrated Model section for more information
Internal Drive Support:
Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and
attaching directly to SAN. Please note that this model does not replace any prior model offerings. The
feature listed above is not included in the standard Drive-less configure to order model. However, all
configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart
Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See
Factory Integrated Model section for more information.
Network Controller:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft
Windows
One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
NOTE: The Gigabit Ethernet adapters transmit from the server only at 2000 Mbps, full duplex per port. For more
information, see the "Network Controller" item in Standards Features section.
Mezzanine Support:
Two (2) additional I/O expansion slots via mezzanine card.
Supports up to (2) mezzanine cards
Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic).
Ethernet NIC Mezzanine options for additional network ports
HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem
NOTE: The NC325m must be installed in mezzanine slot 2 of a half-height server blade to provide
connectivity on all four ports. If installed in mezzanine slot 1 of a half-height server blade, the NC325m will
provide connectivity on 2 of the 4 ports.
HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be
provided on only 2 of the 4 ports
DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008
HP ProLiant BL460c Server Blade
Page 2