Table of Contents
Advertisement
Modify password
To change your password, highlight 'Modify password' and press
ENTER to start up the password modification procedure.
Enter your old password with the digit keys. After the fourth digit is
entered, the next modify password menu is displayed.
Your new password will be asked if your old password is correct.
Enter your new password with the digit keys. After the fourth digit, the
projector will ask to re-enter your new password.
Re-enter your new password .
When the password is correct, the message "Password modified" will
be displayed for a certain time and then the projector returns to the
Service menu.
When the password is not correct, an error message "Invalid pass-
word" will be displayed. Press EXIT to continue. The projector
returns to the Service menu without changing the password.
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp
Run time History with the joy stick and press ENTER. A listing with the
lamp serial number and the corresponding run time will be displayed.
Reset Lamp Run Time.
Highlight Reset Lamp Run Time with the control disk and press
ENTER to select.
5975338 BARCOVISION 9200 210497
MODIFY PASSWORD
Enter Old Password : ----
MODIFY PASSWORD
Enter New Password : ----
MODIFY PASSWORD
Re-enter New Password : ----
SERVICE MODE
Modify Password
Reset Lamp Run Time
Lamp Run Time History
Convergence
Display Settings
Decoder Settings
Color Balance
I2C Device Test
LAMP RUN TIME HISTORY
> SN1425634
SN1234567
SN0000000
SN0000000
SN0000000
SN0000000
SERVICE MODE
Modify Password
Reset Lamp Run Time
Lamp Run Time History
Convergence
Display Settings
Decoder Settings
Color Balance
I2C Device Test
Service Mode
878c
75 h
1000 h
0 h
0 h
0 h
0 h
878b
10-5
Advertisement
Table of Contents
