Using The Soundblaster; Care And Service; Cleaning; Battery Replacement - Bacharach Tru Pointe Ultra Operation And Maintenance Manual

Tru Pointe® Ultra

Using the SoundBlaster

Some Tru Pointe ® Ultra kits include Bacharach's ultrasonic sound generator, the SoundBlaster
The SoundBlaster ® is used to artifi cially pressurize items and detect potential leaks using a 115dB
ultrasonic tone. The Tru Pointe Ultra can detect the tone as it escapes in areas that are not
®
under pressure.
To use the SoundBlaster ® :
1. Press the On/Off Button once on the SoundBlaster
2. Place the SoundBlaster ®
3. Use the Tru Pointe ® Ultra to detect the leaked ultrasonic waves generated by the
SoundBlaster ® using the same method as detecting a standard airborne leak.
NOTE: Using the SoundBlaster
object (i.e. a cylindrical tank) can cause standing waves,
which can result in hot and cold spots. For these situa-
tions push the 'Mode' button to turn the SoundBlaster
burst mode on.
SoundBlaster applications include locating roof and window leaks, air/water leaks in automobile
®
windshields, trunk seal leaks, truck body leaks, and tanker leaks.
8
®
® .
inside the item to be tested.
® inside a symmetrical
® 's
Instruction 28-9000 Tru Pointe® Ultra

5 Care and Service

Cleaning

Both the Tru Pointe
Remove the batteries and close the Battery Door before cleaning. Do not allow water to enter the
unit, especially near the sensor. After cleaning, the units can be dried with a paper towel. Any
® .
automotive vinyl cleaner will restore the units luster.
If you plan to store the unites for an extended period, remove the batteries.

Battery Replacement

When it is time to replace the batteries, use only high quality 9 volt alkaline for both the Tru
Pointe Ultra and the SoundBlaster
®
1.
2.
3.
4.

Service

If you need service, please contact Bacharach Customer Service (800-736-4666 or 724-334-
5000) to obtain an RMA number for service returns. When you receive your RMA number, return
the instrument, postage paid and insured to:
Bacharach, Inc.
9227 E. Lincoln Ave.
Suite 200
Lone Tree, CO 80124 USA
Email: help@mybacharach.com
Ultra and SoundBlaster can be cleaned using dish soap and a damp cloth.
® ®
, and use the following instructions.
®
Hold the unit with the Battery Door facing up.
Press lightly on the middle of the Battery Door and slide it toward the bottom of
the instrument.
Remove the old battery and replace it.
Slide the Battery Door back on the instrument, making sure it is securely attached.
Instruction 28-9000
9