Area - Baby Lock Pro-Stitcher BLPS2 Instruction And Reference Manual

A quilting Area is a portion of the Pro-Stitcher
screen that represents an area on the quilt
(Figure 5.16). Within this area the quilter can place
their designs, repeat them, stretch them, skew them,
crop them, and so forth, knowing that everything
within the defined Area on the Pro-Stitcher screen
will match up with the corresponding area on the
quilt. An Area can be created at any point during
the Design process, but only after a design is loaded.
If a quilter creates an area with no design loaded, the
area will not be visible until a design is loaded.
Areas can be created as a simple rectangle by
identifying only two opposing corners (2 Corner) or
by plotting multiple points around the desired area
to create any unique shape (Multi-Point). The Area
is fixed in position once it is defined and cannot be
moved. If the quilter must move or adjust the defined
Area, first clear the Area and then recreate it.
To create an Area, press the Design menu button to
reveal the Design sub-menus (Figure 5.17). Then
press the Area sub-menu button to reveal
the buttons for the Area panel (Figure 5.18).
5.6 Design Menu

Area

Figure 5.18
Defined area
on quilt
Figure 5.16
Figure 5.17
Pro-Stitcher User Manual