Loading A Design; File Types; Load - Baby Lock Pro-Stitcher BLPS2 Instruction And Reference Manual

File Types

The Pro-Stitcher will read four file types directly:
*.hqf, *.qli, *.txt, and *.tap. Pro-Stitcher cannot
read encrypted files or *.txt files that were created
for computerized quilting systems with proprietary
formats.

Load

To load a design of one of these four file types, press
the Design menu tab on the left (Figure 5.4). Then
press the File sub-menu if it is not already selected
and press the Open button at the bottom of the
screen (Figure 5.5).
Browse to the desired design stored either on the C:
drive or on a removable disk. The different design
file types have color-coded backgrounds as follows:
*.hqf: Beige
*.qli: Light blue
*.txt: Lavender
*.tap: Pink
Loading the thumbnails may take a few moments,
depending on how many designs are stored in the
selected directory and how intricate those designs
are. While the thumbnails are being loaded, a
colored block with the name of the file type will
be visible in place of the actual design thumbnail
(Figure 5.6).
Double-tap the name of the desired file or single-tap
and then press Open in the file browser to open the
design. Press Cancel to exit the file browser without
selecting a new design to load (Figure 5.7).
Figure 5.6

Loading a Design

Figure 5.4
Figure 5.5
Figure 5.7
Design Menu 5.3