Led Indicators; Midspan Led Indicators - Axis P5532 PTZ User Manual

AXIS P5532 PTZ Dome Network Camera
Hardware overview
• Connecting to AXIS Internet Dynamic DNS Service. See page 40. To connect, press and hold the button for
about 3 seconds.
• Resetting the product to factory default settings. See page 46.
Restart button - Press to restart the product.
Multi-connector - Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
• AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product's IP
rating, see Multi-Connector Cable (sold separately), on page 47.

LED indicators

Color Indication
Unlit Connection and normal operation
Amber Steady during startup. Flashes during firmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable or lost.
Red Flashes red for firmware upgrade failure.
Green Shows steady green for 10 seconds for normal operation after restart.
Note
• The Status LED can be configured to flash while an event is active.

Midspan LED indicators

LED
Port
AC input
Color
Unlit
Green
Green, flashing
Green, flashing
Green
Indication
No camera connected.
Steady when camera connected, normal operation.
Slow flash when over current or short circuit condition on the port.
Fast flash when input voltage is out of range or other internal error.
Steady when AC power connected.
6