Axis P5534-E User Manual
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Security Camera
  5. P5534-E
  6. User manual

Axis P5534-E User Manual

Ptz dome network camera
Hide thumbs Also See for P5534-E:
Table of Contents

Advertisement

Quick Links

See also: Technical Manual , User Manual
USER MANUAL
AXIS P5534–E PTZ Dome Network Camera

Advertisement

Table of Contents
loading

Related Manuals for Axis P5534-E

Summary of Contents for Axis P5534-E

  • Page 1 USER MANUAL AXIS P5534–E PTZ Dome Network Camera...
  • Page 2 Later versions of this document will be posted to the Axis website, residential installation. This equipment generates, uses and can radiate as required.

  • Page 3: Table Of Contents

    AXIS Media Control (AMC) ........

  • Page 4: Hardware Overview

    > System Options > Storage > SD Card and click Unmount. Control button - The control button is used for: • Connecting to an AXIS Video Hosting System service. See page 34. To connect, press and hold the button for about 1 second until the Status LED flashes green.

  • Page 5: Led Indicators

    AXIS P5534–E PTZ Dome Network Camera Hardware overview • Connecting to AXIS Internet Dynamic DNS Service. See page 35. To connect, press and hold the button for about 3 seconds. • Resetting the product to factory default settings. See page 41.

  • Page 6: Accessing The Product

    Macintosh computer (Mac OS X), click on the Bonjour tab and select the product from the drop-down list. If you do not know the IP address, use AXIS IP Utility to locate the product on the network. For more information on how to discover and assign an IP address, refer to the Installation Guide.

  • Page 7: Access From The Internet

    Set the root password To gain access to the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root Password dialog, which appears when the product is accessed for the first time.
  • Page 8 Gatekeeper. AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 10 for more information. The toolbar displays the following buttons: The Play button connects to the Axis product and starts playing a media stream.
  • Page 9 AXIS P5534–E PTZ Dome Network Camera Accessing the product Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer. Click the Center mode button and click in the image to center the camera view on that position. The center mode button could also be used to zoom in on a specific area.

  • Page 10: Media Streams

    Note also that all multicast viewers count as one unicast viewer in the maximum total of 20 simultaneous connections. AXIS Media Control negotiates with the Axis product to determine the transport protocol to use. The order of priority, listed in the AMC Control Panel, can be changed and the options disabled, to suit specific requirements.

  • Page 11: Alternative Methods Of Accessing The Video Stream

    AXIS P5534–E PTZ Dome Network Camera Media streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control Panel from: •...
  • Page 12 • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this.

  • Page 13: Setting Up The Product

    Setting up the product Setting up the product The Axis product can be configured by users with administrator or operator rights. Click Setup in the top right-hand corner of the Live View page. Administrators have unrestricted access to all settings.

  • Page 14: Video

    AXIS P5534–E PTZ Dome Network Camera Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 14. • Stream profiles. See page 15. • Camera settings. See page 15. •...

  • Page 15: Stream Profiles

    To select the default stream profile go to Live View Config > Stream Profile and choose the profile from the drop-down list. • For more information see the online help on this page. Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product.

  • Page 16: Image Appearance

    White balance White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axis product can be set to automatically identify the light source and compensate for its color. Alternatively, select the type of light source from the drop-down list.

  • Page 17: Overlay

    An overlay image can be used to provide extra information, or to mask a part of the video image. To use your own image, such as a logo, first upload the image to the Axis product. Go to Video > Overlay Image, click Browse to locate the file and then click Upload.

  • Page 18: Live View Config

    AXIS P5534–E PTZ Dome Network Camera Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features of the Live View page. •...
  • Page 19 Viewer Settings Options for the viewer are configured under Live View Config > Viewer Settings. The Show viewer toolbar option will display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the • video image in your browser.

  • Page 20: Ptz (Pan Tilt Zoom)

    AXIS P5534–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a predefined view that can be used to quickly steer the camera to a specific location. Preset positions can be accessed in several ways: •...

  • Page 21: Guard Tour

    Axis product. Each OSDI zone is set up with coordinates and a descriptive name. OSDI zones are set up under PTZ > OSDI Zones. The Axis product uses the coordinates of the center of the view to set the lower left and upper right zone areas.

  • Page 22: Control Queue

    60 seconds after the last PTZ control command. 2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events, on page 26). The event will immediately be placed first in the queue except when an administrator is in control.

  • Page 23: Detectors

    AXIS P5534–E PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement occurs (or stops) in the view. Up to 10 Include and Exclude windows can be configured: Include windows — target specific areas within the whole video image •...
  • Page 24 AXIS P5534–E PTZ Dome Network Camera Detectors Parameter History Object Size Sensitivity Description Object size relative to window Object memory length. Difference in luminance size. between background and object. An object that appears in High level (100%) Only very large objects trigger Ordinary colored objects on motion detection.

  • Page 25: Applications

    Internet, Automatic Installation appears in the web page. If the product is not connected to the Internet, go to www.axis.com/applications to acquire a License key. You will need a license code and the product’s serial number (found on the label and under System Options >...

  • Page 26: Events

    Events The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

  • Page 27: Convert Event Types To Action Rules

    Convert Event Types to Action Rules If the Axis product is upgraded to firmware version 5.40 or later, it is recommended to convert Event Types to Action Rules. The legacy user Event Types in the camera will continue to work but will not be visible in the user interface of the camera. The Event Types need to be converted to Action rules to become visible in the user interface.

  • Page 28: Recipients

    AXIS P5534–E PTZ Dome Network Camera Events Recipients Recipients receive media files and notification messages. The following recipients are available: Recipient Use with action Email Send Images Send Notification Send Images HTTP Send Images Send Notification Network Share Send Images Send Notification...
  • Page 29 AXIS P5534–E PTZ Dome Network Camera Events To modify or remove recurrences, select the recurrence in the Recurrences List and click Modify or Remove.

  • Page 30: Recording List

    Continuous recording The Axis product can be configured to continuously save video to a storage device. See Storage, on page 38 for more information about storage devices. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings see .
  • Page 31 AXIS P5534–E PTZ Dome Network Camera Recordings Note If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording...

  • Page 32: System Options

    IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering.

  • Page 33: Date & Time

    RADIUS server, examples of which are FreeRADIUS and Microsoft Internet Authentication Service. In Axis' implementation, the network device and the authentication server authenticate themselves with the help of digital certificates using EAP-TLS (Extensible Authentication Protocol - Transport Layer Security). The certificates are provided by an Certification Authority (CA).

  • Page 34: Network

    IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.
  • Page 35 Host Name Configuration The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.
  • Page 36 System Options HTTP The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.
  • Page 37 SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be send to a destination outside the local network (for example the Internet).

  • Page 38: Storage

    To use SNMP v3, HTTPS must be enabled, see HTTPS, on page 32. To enable SNMP v3, check the box and provide the initial user password. Note The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to factory default settings, on page 41. UPnP The Axis product includes support for UPnP .

  • Page 39: Maintenance

    The Axis product provides several maintenance functions. These are available under System Options > Maintenance. Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

  • Page 40: Advanced

    For more information, see www.axis.com/developer File Upload Files, for example web pages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, go to System Options > Advanced > File Upload. Uploaded files are accessed through http://<ip address>/local/<user>/<file name> where <user> is the...

  • Page 41: Reset To Factory Default Settings

    System Options Plain Config Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from this page. Help is available from the standard help pages. To open Plain Config, go to System Options > Advanced > Plain Config.

  • Page 42: Troubleshooting

    Always read the upgrade instructions and release notes available with each new release, before upgrading the firmware. To upgrade, follow these instructions: 1. Save the firmware file to your computer. The latest version of the firmware is available free of charge from Axis website at www.axis.com/techsup 2.

  • Page 43: Symptoms, Possible Causes And Remedial Actions

    Identify the product using its model or serial number. Move the Axis product to an isolated network, or to one with no DHCP or BOOTP server. Set the IP address again, using AXIS IP Utility or ARP/Ping (see the Installation Guide). Open the Setup pages and disabled DHCP in the TCP/IP settings.
  • Page 44 The product is accessible locally but not externally Router configuration To configure your router to allow incoming data traffic to the Axis product, enable the NAT-traversal feature which will attempt to automatically configure the router to allow access to the Axis product, see NAT traversal (port mapping) for IPv4, on page 36.
  • Page 45 Also, make sure that AXIS Media Control is installed on your computer. only) Installation of additional Configure the Axis product to use a Java applet for updating video images in Internet Explorer. Go to Setup > Live View Config and select Java applet under Default viewer. ActiveX component...

  • Page 46: Technical Specifications

    Technical Specifications Item Specifications Function/group Model Camera AXIS P5534-E 50 Hz, AXIS 5534-E 60 Hz Image sensor Progressive scan CCD 1/3” Lens f=4.7 – 84.6 mm, F1.6 – 2.8, autofocus, automatic day/night Horizontal angle of view: 55.2° - 3.2° Minimum Color: 0.74 lux at 30 IRE F1.6...
  • Page 47 ARTPEC-3, 256 MB RAM, 128 MB Flash memory Power Power over Ethernet Plus (PoE+) IEEE 802.3at, max. 30 W AXIS T8123 High PoE Midspan 1-port included: 100-240 V AC, max. 37 W Connectors RJ-45 for 10BASE-T/100BASE-TX PoE IP66-rated RJ-45 connector kit included...

  • Page 48: Performance Considerations

    AXIS P5534–E PTZ Dome Network Camera Technical Specifications Item Specifications Function/group Video AXIS Camera Station — Video management software for viewing and recording up to 50 management cameras software (not See www.axis.com/products/video/software/ for more software applications via partners included) Optional...
  • Page 49 User Manual Ver. M1.8 AXIS P5534–E PTZ Dome Network Camera Date: December 2011 Part No. 45176 © Axis Communications AB, 2011...

Table of Contents