Axis P5544 PTZ User Manual page 11

AXIS P5544 PTZ Dome Network Camera
Accessing the Product
Controls on the Live View Page
The viewer toolbar on the Live View page provides the following controls:
Go to Overview mode.
Click the View size button to reduce the size of the displayed video.
Play a live media stream.
Pause the live media stream.
Start recording the video stream. An ongoing recording is indicated by a red marker. To stop recording, click the button
again. The recording is saved to the location specified in the AMC Control Panel.
Display video in Full-screen mode. Press ESC (Escape) on the computer keyboard to cancel full-screen mode.
Take a Snapshot of the video image. The image is saved to the location specified in the AMC Control Panel. Enable this
button from Setup > Live View Config > Action Buttons.
The viewer toolbar can be disabled from Setup > Live View Config.
The following tabs contain additional settings:
Displays the available Preset Positions. A preset position is a predefined view that can be used to quickly
steer the camera to a specific location. Click on a preset to go to that position. For more information, see
Preset Positions, on page 27.
Displays the available Stream Profiles. A stream profile is a set of pre-configured stream settings including
resolution, compression, frame rate and overlay settings. Click on a profile to stream live video using that
profile. For more information, see Stream Profiles, on page 18.
The Audio tab is displayed if audio is enabled. See Audio Controls, on page 11.
The Actions tab displays:
If PTZ Control Queue is enabled, the time each user is in control of the PTZ functionality is limited. Click the buttons to enter or exit
the queue. The PTZ Control Queue is set up under PTZ > Control Queue, see page 29.
Note
The Live View page can be customized to meet specific requirements and user preferences. If the Live View page has been
customized, some of the functions and controls described here may differ from those displayed in your own Live View page.
Audio Controls
The controls available from the Audio tab on the Live View page are used to control the speakers and microphone connected to the
computer. The buttons are only visible when audio is enabled.
Zoom bar — (Normal mode only) Use the slider to zoom in and out, or click on the
arrows to zoom in and out in steps.
• Manual trigger buttons, see page 12.
• User-defined links, see page 25.
• Output buttons. These are used to control external devices connected to the Axis product's
output ports See page 25.
11