Ports & Devices - Led Settings; Ports & Devices - Maintenance; Support - Support Overview; Support - System Overview - Axis 213 PTZ User Manual

Ports & Devices - LED Settings
When the LED on the front of the AXIS 213 PTZ is Enabled, the LED is lit when the AXIS 213 PTZ is on and
flash when there is any network activity. If Disabled, the LED is off, except when there is a hardware
problem and the LED will flash red.
Ports & Devices - Maintenance
Maintain Server
• Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not
behaving as expected.
• Restore - The unit is restarted and most current settings are reset to factory default values. The settings
that will not be reset are as follows:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time
• Default - The Factory default button should be used with caution. Pressing this button will reset all of
the AXIS 213 PTZ's settings to the factory default values (including the IP address)
Upgrade Server
See Upgrading the Firmware, on page 37.
Backup
Click the Backup button to take a backup of all of the parameters, and user-defined scripts. It will then be
possible to return to the previous settings if the settings are changed and there is unexpected behavior.
Note:
The root password will also be reset to the password saved in the backup file.
Restore
Click the Browse button to locate the saved backup file (see above) and then click the Restore button. The
settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for multi-config-
urations or for firmware upgrades.

Support - Support Overview

The support overview page provides valuable information on troubleshooting and contact information,
should you require technical assistance.

Support - System Overview

This provides a quick look at the status and settings for the camera. Information that can be found here
includes the camera's firmware version, IP address, security, event and image settings, as well as recent log
items. Many of the captions are also links to the Setup pages, so that you can quickly and easily make
adjustments to the camera's settings.
Support - Logs & Reports
Information
The Logs, Server report and the Parameter List provide valuable information for troubleshooting and when
contacting Axis' support service. Please include a recent Server Report with your query when contacting
Axis support.
AXIS 213 PTZ
33