Motion Detection - Axis 213 PTZ User Manual

Include pre-trigger buffer - images stored internally in the server from the time immediately preceding the
trigger. Check the box to enable the pre-trigger buffer, enter the desired length of time and specify the
required image frequency.
Include post-trigger buffer - contains images from the time immediately after the trigger. Configure as for
pre-trigger.
Note:
If the pre- or post-buffer is too large for the internal memory, the frame rate is reduced and individual images may be missing. If
this occurs, an entry is created in the unit's log file.
Continue image upload (unbuffered) - enable the upload of images for a fixed length of time. Specify the
length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is
active. Finally, set the desired image frequency to the maximum (the maximum available) or to a specified
frame rate. The frame rate would be the best possible, but might not be as high as specified, especially if
uploading via a slow connection.
Scheduled Event
A Scheduled event can be activated at pre-set times, in a repeating pattern on selected weekdays.
Setting up a scheduled event
This example describes how to set the AXIS 213 PTZ to send an email notification with saved images from
a set time:
1. Click Add scheduled on the Event types page.
2. Enter a descriptive name for the event, such as Scheduled email.
3. Set the Priority (High, Normal or Low).
4. Set the Activation Time parameters (24h clock) when the event is to be active (such as starting
on Fridays at 18.00 with a duration of 62 hours).
5. Set the When Activated... parameters that is, set what the AXIS 213 PTZ is to do at the specified time
(send uploaded images to an email address).
6. Click OK to save the Event in the Event Types list.
Please see the online help files

Motion Detection

In the Motion Detection menu, you can configure the AXIS 213 PTZ for motion detection. The motion
detection feature is used to generate an alarm whenever movement occurs (or stops) in the image. The AXIS
213 PTZ can use a maximum of 10 Include/Exclude windows.
• Include windows target specific areas within the image
• Exclude windows are areas to be ignored within the Include window
Once configured, the motion detection windows appear in a list when motion detection is selected to trigger
an event. See Setting up a triggered event above.
Note:
• Using the motion detection feature may decrease overall performance in the camera.
• Motion detection will not function while the lens is moving (pan, tilt, zoom)
Configuring motion detection
This example describes how to configure motion detection:
1. Click Motion Detection in the Event Configuration menu.
2. Click the Configure Included Windows radio button.
3. Click New.
4. Enter a descriptive name of your choice under Windows name.
5. Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top and drag
to the desired position).
for descriptions of each available option.
AXIS 213 PTZ
27