Axis 233D User Manual page 11

Click the Home button to steer the camera to the Home position. The Home
position is defined under Setup > Dome Configuration > Preset Positions.
Click the Start/Stop Auto Track buttons to start and stop auto tracking.
The AMC viewer toolbar (AXIS Media Control), available from Windows Internet
Explorer, displays the following buttons:
The Play/Stop buttons start and stop the live video stream.
The Snapshot button takes a snapshot of the current image. The Snapshot function
and the target directory for saving snapshots can be configured from AMC (AXIS
Media Control), which is available from Windows Control Panel.
Click the View Full Screen button and the video image fills the entire screen area.
Press Esc (Escape) on the computer keyboard to cancel full screen view.
Click-in-image movement
Click the Emulated joystick mode button and click in the image to move the
camera in the desired direction.
Click the Center mode button and click on a position in the image to center the
camera view on that position.
Audio controls (visible if audio is enabled)
Click the Speaker and Microphone buttons to switch the sound on and off.
In Half-duplex mode, use the Push-to-talk button to toggle between the
speaking and listening modes. In Simplex - Network Camera speaker only
mode, press this button to send audio.
Use the slider to control the volume of the speaker and microphone.
Area Zoom
This allows you to draw a box over a desired area to zoom into. To activate, click the
Center mode button described in the AMC viewer toolbar or in other web browsers choose
PTZ > Center. Using your mouse, click in the image, hold down the left mouse button and
draw a square over the area you would like to zoom into.
AXIS 233D - Using the Network Dome Camera
11