Equipment Check List - Equinox Systems MEGAPLEX Hardware Reference Manual

Equipment Check List

A MEGAPLEX 24-Port Kit contains a host controller board, one or
more cluster multiplexers and all applicable accessories (hardware,
software and documentation) required by the user's system.
MEGAPLEX MCC 24x4 Host Controller Board
Installs in an 80386- or 80486-based computer.
MEGAPLEX/2 MCC 24x4 Host Controller Board
Installs in a Micro Channel-based computer.
MEGAPLEX/RS MCC 24x4 Host Controller Board
Installs in a Micro Channel-based computer.
1" Interconnect cable (MEGAPLEX only)
Used to connect several MEGAPLEX host controllers
together.
EISA Jumper (MEGAPLEX only)
For EISA bus computers.
UNIX/XENIX Device Driver Kit
Contains the software and supporting manual required to
install MEGAPLEX subsystems in systems running the
UNIX System V 3.2/386 operating system, the 286 or 386
SCO XENIX operating system and compatible variants.
SVR4 STREAMS Device Driver Diskette
Contains the software and supporting manual required to
install MEGAPLEX subsystems in systems running the
UNIX System V Release 4 operating system and compatible
variants.
AIX-2 Device Driver Kit (MEGAPLEX/2 only)
Contains the software and supporting manual required to
install MEGAPLEX/2 boards in systems running IBM AIX
Version 2.
AIX-3 Device Driver Kit (MEGAPLEX/RS only)
Contains the software and supporting manual required to
install MEGAPLEX/RS boards in systems running IBM AIX
Version 3.
Introduction
or
or
3