Cmx-24D Connector Pinouts; Device Wiring - Equinox Systems MEGAPLEX Hardware Reference Manual

Figure 3-13. CMX-24D DB-25 connector orientation.

CMX-24D Connector Pinouts

Figure 3-14 shows the pinouts for one CMX-24D cluster multiplexer
DB-25 female connector. All 24 connector jacks are identical.
Figure 3-14. CMX-24D Connector Pinouts

Device Wiring

Device wiring is dependent on the specific signal requirements of the
system peripheral devices. Cable connectors plugged into the CMX-
24D connector jacks must have a male DB-25 connector. The
connector on the opposite end of each cable should mate to the
peripheral device port (terminal, printer, personal computer or
modem).
MEGAPLEX Cabling 27