Equinox Systems MEGAPLEX Hardware Reference Manual page 19

1. After receiving the 165 error message, the machine appears
to hang. Place the Reference Diskette in drive A: and press
F1. The screen clears and the banner screen appears. Press
Enter to continue. The following message is displayed:
Use Automatic Configuration (Y/N)? N
2. When answering no to the automatic configuration ques-
tion, the following main menu appears:
Main Menu
Because the MEGAPLEX/2 installation modifies the Refer-
ence Diskette, a backup of the diskette should be made. A
blank 1.44 MB diskette that is not write protected is re-
quired. Select option #2 and follow the instructions.
After completing the backup, store the original Reference
Diskette in a safe place. Continue using the backup.
3. Reboot the system using the backup Reference Diskette and
select option 5, Copy an option diskette, from the main
menu.
When asked, insert the new Option Diskette into drive A:.
The @6386.ADF file is copied into RAM. When asked, insert
the Reference Diskette into Drive A. The @6386.ADF file is
then appended to the Reference Diskette.
4. After the copy is finished and the display returns to the
main menu, select option 3 (Set configuration).
The set configuration menu appears on the display screen.
From this menu, select option 5, Run automatic configura-
tion.
Set Configuration
Installing MEGAPLEX Hardware
1. Learn about the computer.
2. Backup the Reference Diskette.
3. Set Configuration.
4. Set features.
5. Copy an option diskette.
6. Test the computer.
1. View configuration.
2. Change configuration.
3. Backup configuration.
4. Restore configuration.
5. Run automatic configuration
13