Wiring Cmx-24D To Peripheral Devices - Equinox Systems MEGAPLEX Hardware Reference Manual

Wiring CMX-24D to Peripheral Devices

The CMX-24D cluster multiplexer provides standard RS-232 DTE
signals on 24 DB-25 connectors, one for each connected device. Note
the following items:
The signals for all 24 connector jacks are identical to one
another as shown in Figure 3-12.
The jacks on the CMX-24D all face towards the bottom of
the product as shown in Figure 3-13. Connector jacks 1
through 4 are located from top to bottom on the left side of
the front panel and connector jacks 21 through 24 are
located from top to bottom on the right side of the front
panel.
Up to 10-conductor cable with DB-25 connectors may be
used to wire from the CMX-24D to a peripheral device.
26
Figure 3-12. CMX-24D RS-232 signals.
MEGAPLEX Hardware Reference Manual