How Do I Stop Dockware - HP iPAQ rx3000 series Frequently Asked Questions Manual

Ä
CAUTION: Because most of the applications and data you install on
your HP iPAQ are held in main memory, you need to reinstall them if
the battery completely discharges or if the battery is removed from
the unit for extended periods of time. The backup battery in your HP
iPAQ lasts approximately 10 minutes or less.
You do not need to reinstall applications and data installed in the
iPAQ File Store folder.

How Do I Stop DockWare?

DockWare is a personalized desk clock, calendar, and screensaver
for your HP iPAQ. You can select preinstalled pictures to be used
as a slideshow in the background or you can add your own
personal pictures. For more information about DockWare, refer to
the Special Features Guide or the DockWare help found on your
HP iPAQ.
Note:
and start after 5 minutes of inactivity on the HP iPAQ.
The application stops as soon as you touch the screen or push any
button on the HP iPAQ, with the exception of scrolling up or
down to view a picture. Also DockWare stops running if an alarm
or any other popup window appears.
Be aware of the following:
■
If your HP iPAQ is running on battery power, this application
does not automatically start.
■
If DockWare is running and you take your HP iPAQ out of the
desktop cradle, the application continues to run on battery
power until you turn off your device or DockWare.
To disable DockWare, tap and hold anywhere on the screen, and
then uncheck Start Automatically from the popup menu. This
menu item acts as a toggle switch to start and stop the DockWare
software program. Therefore, if you want to start DockWare
again, you need to select this option again.
The DockWare program settings are turned on by default
53