Advertisement
D. VALET/OVERRIDE SWITCH
NOTE: Both the VALET and OVERRIDE functions are performed from the
same switch.
1. OVERRIDE FUNCTION
he OVERRIDE FUNCTION may be used if the RF-303 remote is lost or
inoperative. To operate the OVERRIDE FUNCTION, enter the vehicle (alarm
will sound). Switch the ignition to ON. Move the VALET/OVERRIDE switch
to ON, then OFF. The alarm will stop. The RF-303 will be disarmed. Quickly
replace or service the remote transmitter to insure continued vehicle protection.
2. VALET FUNCTION
If PASSIVE (Automatic) arming has been is selected, the RF-303 may be
placed into the VALET (stand-by) mode to allow for vehicle service, washing,
or attendant parking without self-arming after the ignition has been switched off,
and without leaving the RF-303 remote control with unauthorized individuals.
To operate the VALET FUNCTION, turn the vehicle ignition to ON and move
the VALET/OVERRIDE switch to ON.
To return to normal operation, turn the vehicle ignition to ON and move the
VALET/OVERRIDE switch to OFF.
3. KEYLESS ENTRY MODE
In the valet mode, the vehicle doors can be locked and unlocked using the
remote if the remote door lock/unlock system is installed. (*) However, there
will be no chirp confirmation. It is strongly recommended that the driver visually
confirm that the doors are locked or unlocked.
5
Advertisement
