Download Print this page

Panic Function - Autopage RF-303 Operation Instructions Manual

Advertisement

designed to operate vacuum/electric door lock systems, found on certain European
vehicles. See manual for other door lock functions and/or options.
2. TEMPORARY ARM/DISARM CHIRP DELETE FROM REMOTE
(Vehicle horn, siren)
Upon approaching the vehicle (whether armed or disarmed) push the AUX
button on the remote transmitter for half (0.5) second, then very quickly push the
ON/OFF button on the transmitter to arm or disarm in the usual manner. The
ARM/DISARM chirp sound will be silenced only for this particular arming or
disarming cycle. The above described sequence must be repeated each time it is
desired to cancel the ARM/DISARM chirp sound.

3. PANIC FUNCTION

The RF-303 remote control may be used as a remote panic switch to trigger the
horn or siren in cases of emergency. To activate the PANIC FUNCTION press
and hold the ON/OFF button on the remote transmitter for a minimum of three
(3) seconds. The vehicle horn or optional siren will sound. To stop the PANIC
FUNCTION press the ON/OFF button on the transmitter.
4. REMOTE CONTROL TRUNK/HATCH RELEASE
(Optional at time of installation)
The RF-303 remote transmitter may be used to release your vehicle's trunk or
hatch release. (*) To remotely release the vehicle trunk or hatch, approach the
vehicle and press the ON/OFF button on the remote control transmitter to
disarm the RF-303. Then press the AUX button on the remote transmitter for
three (3) seconds. The trunk or hatch will automatically release. (**)
NOTE (*) Your vehicle must be equipped with an electronic trunk or hatch
release.
NOTE (**) If you do not intend to drive the vehicle, you must rearm the RF-
303.
2

Advertisement

loading