Overrides The Alarm With Password Pin Code; Kvalet Mode; Enter Valet Mode; Exit Valet Mode - Autopage RS-727LCD Operation Manual

Valet Switch. (When finished above procedures, system's siren will stop alarming,
lights will stop flashing, but the vehicle can't be started.)
3. Within 15 seconds of the last digit code enter (the 1st code), then turn the Ignition
Switch "OFF" and then "ON".
4. Within 15 seconds, enter your chosen second digit code by pressing and releasing
the Valet Switch.
5. Turn the ignition switch "OFF" position. 4 Chirps from siren/horn and 3 flashes from
the parking lights will indicate the system has disarmed.
Note 1: You must override the alarm within 60 seconds. If not, the system will
automatically re-arm.
EXAMPLE: To Override The System With The Password Code 83,
1. Enter the vehicle and turn the ignition switch to the 'ON' position.
(Alarm will sound.)
2. Within 5 seconds, Press and Release the Valet Switch 8 times, (When finished the
system's siren will stop alarming, lights stop flashing, but the vehicle can not be started
or driven away.)
3. Within 15 seconds of entering the last digit code enter (the 1
Switch "Off" and then "ON".
4. Within 15 seconds, Press and Release the Valet Switch 3 times.
5.
Turn the Ignition Switch to the "Off" position. 4 Chirps form siren/horn and 3 flashes
from the parking lights will indicate the system has disarmed.
K. VALET MODE:
(System in Disarm or Valet mode)
The valet switch allows you to temporarily bypass all alarm function, eliminating the
need to hand your transmitter to parking attendants or garage mechanics. When the
system is in valet mode, all alarm functions and remote start functions are bypassed,
however, the remote panic feature and remote door locks will remain operational. To
use the valet mode, the system must first be disarmed either by using your remote
transmitter, or by operating the Manual Override sequence.

Enter Valet Mode:

1. From the disarmed condition, turn
the ignition to the "ON" position.
2. Push and hold the valet switch for 2
seconds until the LED turns on. The
LED will remain "on" as long as the
system is in 'valet mode'.

Exit Valet Mode:

1.Return to normal operation, turn ignition 'on'.
2.
Push and hold the valet switch for 2 seconds, The LED will turn off, indicating the
system has exited the valet mode.
L. CAR LOCATOR
Under the armed mode, press the
activate the car locator function. The siren will chirp
6 times. The parking lights will flash 12 times
making it easier to locate your car.
st
code), turn the Ignition
Remote Door Lock Remote Door Unlock
button to
14