A SS EM BLY ST EP 2
��������
�����������������
���������������
����������
A) Open HARDWARE BAG FOR STEP 2.
B) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C) Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT
WASHERS (C).
HARDWARE BAG FOR STEP 2 CONTENTS :
��������
�����
������
���������
�����
������
8
CSE3.5-4.5 Elliptical Rev 0.4.indd 8-9
������������
��������������������
�������������
�����������������
���������������
�����
�����
������
������
����������
��������������
����������
D) Insert the left TOP SIDE COVER, followed by the right TOP SIDE COVER and snap them together.
E) Insert ACCESSORY TRAY and secure it using 2 SCREWS (D) as shown.
F) Slide CONSOLE MAST GROMMET down to seal the console mast hole.
�������
����
�������
���������������
9
6/3/05 5:42:03 PM