ATCOM AX-2G4A Product Manual page 10

C C C C hapter hapter hapter hapter 4 4 4 4 Software
1. Please check if the AX-2G4A driver has been loaded successfully, run cat /proc/interrupts
command and you should see one line with ax4g/ax2g4a:
20: 2310670
If you can not see ax4g/ax2g4a, you can try to poweroff your server and replug AX-2G4A into
another PCI slot.
2. Please run the "dahdi_genconf" command to configure the /etc/dahdi/system.conf file and
generate /etc/asterisk/dahdi-channels.conf file.
[root@localhost ~]# dahdi_genconf
It does not show any output if dahdi_genconf runs successfully.
After running dahdi_genconf successfully, the system.conf file will get the following
configuration:
/etc/dahdi/system.conf:
# Autogenerated by /usr/sbin/dahdi_genconf on Thu Jul 1 11:33:13 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
# This file is parsed by the Dahdi Configurator, dahdi_cfg
# Span 1: WCTDM/6 "ATCOM AX4G/AX2G4A Board 7" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
fxsks=3
echocanceller=mg2,3
fxsks=4
echocanceller=mg2,4
fxoks=5
echocanceller=mg2,5
fxoks=6
echocanceller=mg2,6
# Global data
loadzone = us
defaultzone = us
www.atcom.cn
Software Software
Software Configuration
2218516 IO-APIC-fasteoi
Configuration Configuration
Configuration
ax4g/ax2g4a
9