System Event Log; System Storage Usage; System Storage Backup; Firmware Upgrade - Planet Networking & Communication IPX-2000 User Manual

Internet telephony pbx system

Hide thumbs Also See for IPX-2000:

Table of Contents

PLANET IPX-2000 user's manual

2.8.3 System event log

Event log includes reported events from following system services: NTP, DNS, DHCP, and

PPPoE.

This displays the size and utilization percentage of the internal main system storage.

To back up internal main storage, click the Backup button and follow instructions to insert the

USB connector of an external USB drive. Options include whether to keep or remove CDR

and/or voicemails after backup. After a confirmation of the insertion, back starts a few seconds

later if the external USB drive is accessible and found enough available space. On a successful

backup, the name of the new folder created on the external drive will be displayed. Either the

backup is successful or failed, a user must remove the USB connector of the external drive.

The version of the running PBX firmware could be found in System -> PBX firmware. To

upgrade current firmware, locate a release file obtained from the vendor, and click Upgrade.

Note that the filename of firmware should not be changed, otherwise system will refuse to

upgrade with it.

Log out administrator and close browser windows.

By selecting System -> Shutdown, you can shutdown or reboot the machine after clicking the

Yes button in this page. In case such software reboot fails, press and release the hardware reset

button quickly will do the same.

12 of 51

Table of Contents