Pots Setup; Feature Configuration - Planet Networking & Communication IPX-2000 User Manual

Internet telephony pbx system
Hide thumbs Also See for IPX-2000:
Table of Contents

Advertisement

PLANET IPX-2000 user's manual
Terminal password
DID of extension
Language
19
Usergroup
of privilege
Bandwidth sensitive

3.16 POTS setup

This page allows selection of country-based progress tones and/or impedance of POTS ports. IP
PBX service needs to be restarted before new setting takes effect.

3.17 Feature Configuration

A feature is a logical entity presenting a function module of IP PBX, e.g. meet-me conference,
auto attendant, voice mail, etc. IP PBX service must be reloaded to activate changes.
19
Please refer to 3.8 for details.
Password of SIP trunk given on the other IP
PBX for authentication.
When enabled DID, choose an extension to be
an unconditional destination for incoming
calls to this terminal. The number of the
terminal is therefore regarded as the direct line
number of the extension.
Preferred language for system instructions
heard from the terminal.
When disabled DID, select a usergroup whose
reachability to other usergroups and trunks
will be used as the privilege of inbound calls
from this terminal.
F
There may not be appropriate usergroups
to select initially. One can come back later
once the expected usergroup has been added.
Indicate the trunk is over a bandwidth-
sensitive link, e.g. across Internet. If checked,
a limit must be specified for call admission.
39 of 51

Advertisement

Table of Contents
loading

Table of Contents