Pitney Bowes 9754 Operator's Manual page 71

8 Network Tab
Primary WINS Server
Secondary WINS Server
Primary Server Logged in
Secondary Server Logged in
Apply Button Click this button to apply any settings you have
Clear Button Click this button to cancel any settings you have
After you configure the NetBIOS (WINS) settings, restart the printer.
The Network Interface Card's status page should now show that the
Network Interface Card is successfully registered with the WINS
server. The items labeled
64
Interface Card with DHCP.
You may change the NetBIOS name here, by
entering a new name. The name can be up to 15
characters long.
If you previously configured a DHCP server to
provide the Network Interface Card with the IP
address of the primary WINS server, this item
shows the address. Otherwise, enter the IP address
of the primary NetBIOS name server here.
You may also enter the IP address of a secondary
NetBIOS name server, if you want. If you
configured your DHCP server to provide the
address of a secondary WINS server to the
Network Interface Card, the address fields are
filled in with the appropriate information
automatically.
Name of the Primary WINS Server to which the
printer is currently logged in.
Name of the Secondary WINS Server to which the
printer is currently logged in.
input up to this point.
input up to this point.
Primary Server Logged in and Secondary