Pitney Bowes 9754 Operator's Manual page 63

8 Network Tab
Print Server Name
Print Server Password
Preferred File Server
Preferred NDS Context
Preferred NDS Tree
56
environment is disabled while this option is
unchecked.
Input the print server name you want. The default
print server name when this field is left blank is:
MLT_
<Network Interface Card serial number>
When you want to use a password for logging into
the Network Interface Card, type the password
you want to specify into the field. Type the same
password into the
confirmation. The password you specify must be
the same as the bindery and NDS-based print
server password.
Type in the name of the preferred file server when
setting up for bindery and bindery emulation. See
the
Network Interface Card Operator's Manual
more information about the preferred file server.
The print server must always be configured on a
preferred file server. Failure to properly configure
the preferred file server can cause incorrect
printing results.
Input the print server for NDS operation. In this
case, always input the entire context, without
inputting a period at the beginning of the path.
Example: ou=standard.ou=organization_1
Input the print server for NDS operation. If you do
not know what the tree is, input
DOS command line.
Password Retype
whoami
.
field for
for
at the