Pitney Bowes 9754 Operator's Manual page 60

Default Gateway
If the network has a router, input the IP address of
the router.
Base Port Number
Type in the base port number for RAW port
printing. A port number that in one greater than
the base port number you specify here is used for
actual printing.
Example: Specifying a base port number of 10000
results in an actual port number of 10001.
DHCP Checking this option sends a DHCP (Dynamic
Host Configuration Protocol) request whenever
the Network Interface Card is powered up. When
there is a DHCP server on the network, the
Network Interface Card can obtain IP parameters
automatically from the server at power up.
IP Address in NVRAM
When this option is checked, the Network
Interface Card uses the IP address stored in
NVRAM when the card is powered up.
Apply Button Click this button to apply any settings you have
input up to this point.
Clear Button Click this button to cancel any settings you have
input up to this point.
8 Network Tab
53