Connecting Using Hdmi - Pioneer DV-696AV-S Operating Instructions Manual

Connecting up
Connecting the digital output
This player has both optical and coaxial-type
digital audio outputs for connection to an AV
receiver. Connect whichever is convenient.
Depending on the capabilities of your AV
receiver, you might have to set up this player to
output only digital audio in a compatible
format. See Digital Audio Out settings on
page 38 and refer to the operating instructions
that came with your AV receiver.
Note that SACD audio is not output through
these jacks, so this connection should be in
addition to, rather than instead of, a 5.1
channel analog connection.
• Connect one of the DIGITAL AUDIO OUT
jacks on this player to a digital input on
your AV receiver.
AV receiver
For an optical connection, use an optical cable
(not supplied) to connect the OPTICAL
DIGITAL AUDIO OUT jack to an optical input
on your AV receiver.
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to connect
the COAXIAL DIGITAL AUDIO OUT jack to a
coaxial input on your AV receiver.

Connecting using HDMI

If you have a HDMI equipped monitor or
display, you can connect it to this player using
a commercially available HDMI cable.
The HDMI connector outputs uncompressed
digital video, as well as almost every kind of
digital audio that the player is compatible with,
including DVD-Video, DVD-Audio (see below
for limitations), Video CD/Super VCD, CD and
MP3.
1
OUT interconnect on this player to an HDMI
interconnect on a HDMI-compatible
monitor.
DIGITAL IN
(OPTICAL)
DIGITAL IN
(COAXIAL)
AC IN
OPTICAL COAXIAL
• The arrow on the cable connector body
DIGITAL AUDIO OUT
Use an HDMI cable to connect the HDMI
HDMI
connector
HDMI-compatible display
VIDEO OUT
P
SW S L B
L
R C S R P Y
R
HDMI OUT
AUDIO OUT (5.1ch)
COMPONENT VIDEO OUT
should be face up for correct alignment
with the connector on the player.
S-VIDEO OUT
02
15
En