Connections; Connecting Using An Audio/Video Cable; Connecting Using An Hdmi Cable - Pioneer DV-420V-S Operating Instructions Manual

Section

Connections

03
 Be sure to turn off the power and
unplug the power cord from the power
outlet whenever making or changing
connections.
 Connect the power cord after all the
connections between devices have been
completed.

Connect the player's video output
directly to the TV.
This player supports analog copy protec‑
tion technology. Therefore the picture
may not be displayed properly if con‑
nected to a TV via a DVD recorder/ video
deck or when playing the player's out‑
put material that is recorded by a DVD
recorder/ video deck. Furthermore, the
picture may not be displayed properly due
to the copy protection when the player
is connected to a TV with a built‑in video
deck. For details, contact the manufac‑
turer of your TV.
12
En
Connecting using an audio/
video cable
Player's rear panel
VIDEO OUT DIGITAL
AUDIO OUT
P
B
COAXIAL
P Y
R
HDMI OUT S-VIDEO OUT
COMPONENT VIDEO OUT
An S-Video cable
(commercially
available) can also be
used for
connection.
To S-video
input terminal
Connecting using an HDMI
cable
By using an HDMI cable, digital signals can
be transferred to an HDMI‑compatible TV on
a single cable with no loss of picture or sound
quality. After connecting, make the player's
resolution and HDMI color settings according
to the HDMI‑compatible TV. Also refer to the
HDMI‑compatible TV's operating instructions.

HDMI, the HDMI Logo and High‑
Definition Multimedia Interface are trade‑
marks or registered trademarks of HDMI
Licensing, LLC.
Yellow
AUDIO OUT
L
White
Red
R
OPTICAL
Audio/video
cable (included)
To audio/video
input terminals
TV
