Audio Adjustments; Introduction Of Audio Adjustments - Pioneer AVH-P6450 Operation Manual

Section

Audio Adjustments

10
Introduction of audio
adjustments
The display for this MENU is the same regard-
less of which source you operate from.
1
display
AUDIO
Shows the audio adjustments status.
1 Press
A.MENU
MENU is displayed.
2 Press 5 or ∞ to select
.
A.MENU
The AUDIO MENU is displayed as follows:
(fader/balance adjustment)—
FAD/BAL
(equalizer curve adjustment)—
MENU
(bass)—
TREBLE
ness)—
SUB WOOFER
(non fading)—
ING
(source level adjustment)
You can operate a desired function. For details,
refer to the pages for each of the functions.
is only displayed when
NON FADING
CTRL:EXTERNAL
WOOFER is not displayed.)
44
En
1
in each source display.
, and press
AUDIO
EQ
BASS
(treble)— (loud-
LOUDNESS
(subwoofer)—
NON FAD-
(high pass filter)—
HPF
S.W
is set in INIT MENU. (SUB
• When the subwoofer controller setting is
CTRL:EXTERNAL
switch the
SUB WOOFER
• When the subwoofer controller setting is only
S.W CTRL:EXTERNAL
fading output on/off mode. (Refer to page 48.)
• When selecting the FM tuner as the source,
you cannot switch to
• Select
BACK
to return to the previous display.
BACK
Pressing
WIDE
the previous display.
• To return to the playback display, press
or
BAND/ESC
• When the setting is
indications are for
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
SLA
or , you cannot
REAR SP: S.W
. (Refer to page 48.)
, you can switch the non
.
SLA
in the MENU display or press
on the head unit returns you to
on the remote control.
WIDE
,
REAR SP:S.W
.
BAL
S.W
FAD/BAL