Tuner; Listening To The Radio - Pioneer AVH-P6450 Operation Manual

Tuner

Listening to the radio

1 4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 20.
1
indicator
BAND
Shows which band the radio is tuned to, AM
or FM.
2
indicator
FREQUENCY
Shows to which frequency the tuner is
tuned.
3
( ) indicator
STEREO ST
Shows that the frequency selected is being
broadcast in stereo.
4
indicator
PRESET NUMBER
Shows what preset has been selected.
1 Press to select the tuner
SOURCE
Press until you see
SOURCE
2 Use to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
3 Press to select a band
BAND/ESC
Press until the desired band is dis-
BAND/ESC
played, , ,
FM1 FM2 FM3
2
.
displayed.
Tuner
.
for FM or .
AM
4 To perform manual tuning, press 2 or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
3
or 3 for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold 2 or 3 you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the
light.
ST indicator will
STEREO ( )
Section
05
19
En