Table of Contents
Advertisement
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Insert a disc to be used for the recording. The system and content of
the disc will be checked. '
a
b A DVD+RW disc was inserted that already contains recordings. Use
A and B to select a location where the recording should be started.
a
b The inserted DVD disc is empty.
a
b The inserted disc is a DVD+RW disc whose contents are not compatible
with DVD Video (e.g. a data disc). This disc cannot be used for recordings
until the entire disc is erased using the REC/OTR n button.
a
b A disc can only contain a max. of 48 titles (including the empty titles).
Erase the titles or change the disc.
3
If necessary, switch to the internal tuner on the DVD recorder using
the MONITOR button on the remote control.
4
Select the programme number (station name) you wish to record
using CHANNEL q or CHANNEL r . The following will appear on
the display:
If a TV station transmits a station name it will be shown in the display.
Scart socket at the back EXT 1 TO TV-I/O
Scart socket at the back EXT 2 AUX I/O
SVHS-/Audio front sockets S-VIDEO / left AUDIO right
Video/audio front sockets A/V VIDEO / left AUDIO right
Switching
automatically. In case both sockets are used, the signal received at
socket S-VIDEO is treated with priority.
5
To start recording, press REC/OTR n on the remote control or
RECORD on the DVD recorder. If you want to start the recording
at
the
end
of
REC/OTR n button until the message '
display.
For DVD+R discs each new recording is always added at the end of
all previous recordings as existing recordings cannot be overwritten.
On the display will appear e.g.:
' will appear on the display.
between
sockets
S-VIDEO and
the
existing
recordings,
VIDEO is
done
hold
down
the
' appears on the
Manual recording
Hide quick links:
Advertisement
Table of Contents
