Philips DVDR880 User Manual page 18

When you install your DVD recorder for the first time, select one of the following options:
If your TV set is equipped with 'Easy Link, Cinema Link, NexTView Link, Q-Link, Smart Link,
Megalogic, Datalogic, ...' and you wish to use a scart cable.
If your TV set is equipped with functions such as Easy Link, Cinema Link,
NexTView Link, Q-Link, Smart Link, Megalogic or Datalogic, which are fully
compatible with one another (TV set, DVD recorder, etc.), your DVD
recorder can exchange information with your TV set. Please see your TV's
operating instructions.
If your TV set is not equipped with 'Easy Link, Cinema Link, NexTView Link, Q-Link, Smart Link,,
Megalogic, Datalogic, ...' and you wish to use a scart cable.
If your TV set is equipped with an S-Video (SVHS) socket.
This connecting cable, also known as the SVHS cable, is used to transmit the
brightness signal (Y signal) and colour signal (C signal) separately. This mini
DIN socket/plug is also called a Hosiden socket/plug.
If your TV set is equipped only with a video (CVBS) socket.
This socket, usually referred to as the Cinch socket, is used for transmitting
the composite video signal (FBAS, CVBS). In this method of transmission the
colour signal and the brightness signal are transmitted on the same cable. In
certain circumstances, this can lead to problems with the picture, such as
'Moiré' patterns.
Connecting the DVD recorder